Stanisław Stupkiewicz

Professor Stanisław Stupkiewicz Institute of Fundamental Technological Research (IPPT PAN) Department of Mechanics of Materials Pawińskiego 5B 02-106 Warsaw, Poland Phone: +48 22 8261281 ext. 338 Email: sstupkie (at) ippt.pan.pl Official webpage: www.ippt.pan.pl/en/staff/sstupkie ResearcherID: J-8417-2012   |   ORCID ID: 0000-0002-4592-3576   |   Scopus ID: 6603569422   |   Google Scholar

|   Short CV   |   Membership   |   Publications   |   Research interests   |   PhD supervision   |   Positions available (NEW!)   |

Short CV

• 1989 - MSc at the Warsaw University of Technology (PW, MEiL)
• 1996 - PhD at IPPT
• 2006 - habilitation at IPPT
• 2011 - full professor

• 1991-1995 - PhD student at IPPT
• since 1995 - employed at IPPT, currently as a full professor, head of the Materials Modelling Group
• 2013-2014 - visiting professor at the Solid and Structural Mechanics Group, University of Trento, Italy

Membership

• Polish Academy of Sciences: corresponding member since 2020
• The Committee on Mechanics of the Polish Academy of Sciences (Komitet Mechaniki PAN): member since 2007, Scientific Secretary (2011-2015), Chairman (2020-2024)

• Archives of Mechanics: member of the Editorial Committee since 2007, Section Editor since 2011
• Archive of Applied Mechanics: member of the Editorial Board since 2019
• Mechanics of Materials: Associate Editor (2021-2023), Editor since 2024

Publications

>>> Full list of publications <<<

• J. Lengiewicz, M. de Souza, M.A. Lahmar, C. Courbon, D. Dalmas, S. Stupkiewicz and J. Scheibert (2020).
  Finite deformations govern the anisotropic shear-induced area reduction of soft elastic contacts,
  Journal of the Mechanics and Physics of Solids, vol. 143, 104056.
• K. Tuma, M. Rezaee-Hajidehi, J. Hron, P.E. Farrell and S. Stupkiewicz (2021).
  Phase-field modeling of multivariant martensitic transformation at finite-strain: Computational aspects and large-scale finite-element simulations,
  Computer Methods in Applied Mechanics and Engineering, vol. 377, 113705.
• M. Rezaee-Hajidehi, P. Sadowski and S. Stupkiewicz (2022).
  Deformation twinning as a displacive transformation: Finite-strain phase-field model of coupled twinning and crystal plasticity,
  Journal of the Mechanics and Physics of Solids, vol. 163, 104885.
• M. Ryś, S. Stupkiewicz and H. Petryk (2022).
  Micropolar regularization of crystal plasticity with the gradient-enhanced incremental hardening law,
  International Journal of Plasticity, vol. 156, 103355.
• M. Rezaee-Hajidehi and S. Stupkiewicz (2023).
  Predicting transformation patterns in pseudoelastic NiTi tubes under proportional axial-torsion loading,
  International Journal of Solids and Structures, vol. 281, 112436.
• J. Dobrzański and S. Stupkiewicz (2024).
  Towards a sharper phase-field method: A hybrid diffuse–semisharp approach for microstructure evolution problems,
  Computer Methods in Applied Mechanics and Engineering, vol. 423, 116841.

Research interests

• micromechanics of interfaces and interface layers
• multiscale modelling of shape memory alloys
• interfacial energy effects in martensitic transformations
• phase-field modelling of martensitic transformations
• plasticity: grain refinement, size effects
• computational plasticity
• constitutive modelling of contact phenomena
• multiscale modelling of contact phenomena
• computational contact mechanics
• sensitivity analysis and optimization
• finite element method and symbolic code generation (collaboration with J. Korelc, developer of AceGen/AceFEM)

	martensitic microstructures, interfacial energy, size effects		phase-field modelling of martensitic transformations		sensitivity analysis, computational contact mechanics		contact micromechanics, thermal contact conductance
	macroscopic model of pseudoelasticity in shape memory alloys (SMA)		gradient crystal plasticity, indentation size effect		soft elasto-hydrodynamic lubrication (soft EHL)		finite element modelling of progressive wear

PhD supervision

• Jakub Lengiewicz (2009, IPPT): Sensitivity analysis for frictional contact problems (in Polish)
• Przemysław Sadowski (2009, IPPT): Modelling of heat transfer between rough contact surfaces in metal-forming processes (in Polish)
• Mohsen Rezaee-Hajidehi (2018, University of Palermo, co-supervisor): Nonlinear analysis of reinforced concrete frames: safety evaluation and retrofitting techniques
• Michał Wichrowski (2021, IPPT): Fluid-structure interaction problems: velocity-based formulation and monolithic computational methods
• Maciej Lewandowski-Szewczyk (2021, IPPT): Modeling of size effects in contact problems (in Polish)

Positions available

We are continuously looking for good candidates willing to pursue research in the field of multiscale modelling, mechanics of materials, contact mechanics, computational mechanics, etc.

A call will soon be opened within a new project (NCN OPUS-LAP) on phase-field modelling of omega phase in metastable beta-Ti alloys (short desription of the project):

• 2.5-year fully paid postdoc position, for details see basic information.

Interested candidates are encouraged to contact me by email: sstupkie (at) ippt.pan.pl.

 
Last modified: April 23, 2024