List of Publications


Journal publications   Monographs   Special volume   Volume Editing   Conference  

Journal publications

  1. I.Paczelt, S.Kucharski, Z.Mroz, The experimental and numerical analysis of quasi-steady wear processes for a sliding spherical indenter, Wear, 274-275, 127-148, 2012.
  2. S.Kucharski, Z.Mroz, Identification of wear process parameters in reciprocating ball-on-disc tests, Tribology International, 44, 154-164, 2011.
  3. I.Paczelt, Z.Mroz, Numerical analysis of steady thermoelastic wear regimes induced by translating and rotating punches, Computers and Structures, 89, 2495-2521, 2011.
  4. Z.Mroz, I.Paczelt, Analysis of thermoelastic wear problems, Journal of Thermal Stresses, 34, 569-606, 2011.
  5. R.Balevicius, I.Sielamowicz, Z.Mroz, R.Kacianauskas, Investigation of wall stress and outflow rate in a flat-bottomed bin: a comparison of the DEM model results with the experimental measurements, Powder Technology, 214, 322-336, 2011.
  6. G.Zietek, Z.Mroz, On the hardening rule for austenitic steels with account for the strain induced martensitic transformation, Int. Journal of Structural Changes in Solids Mechanics and Applications, 3, 21-34, 2011.
  7. K.Dems, Z.Mroz, Damage identification using modal, static and thermographic analysis with additional control parameters, Computers and Structures, 8, 1254-1264, 2010.
  8. K.P.Mroz, Z.Mroz, On crack path evolution rules, Eng. Fract. Mech., 77, 1781-1807, 2010.
  9. I.Paczelt, Z.Mroz, Variational approach to the analysis of steady state thermoelastic wear regimes, International Journal Numerical Methods in Engineering, 81, 728-760, 2010.
  10. Z.Bojczuk, Z.Mroz, Topological sensitivity derivative and finite topology modifications: application to optimization of plates in bending, Structural and Multi-disciplinary Optimization, 39, 1-15, 2009.
  11. I.Paczelt, Z.Mroz, On the analysis of steady state sliding wear processes, Tribology International Journal, 42, 275-283, 2008.
  12. R.Balevicius, R.Kacianauskas, Z.Mroz, I.Sielamowicz, Discrete particle investigation of friction effect in filling and unsteady/steady discharge in three-dimensional wedge shaped hopper, Powder Technology, 187, 159-174, 2008.
  13. J.Maciejewski, Z.Mroz, An upper bound analysis of axisymmetric extrusion assisted by cyclic torsion, Journal of Materials Processing Technology, 206, 333-344, 2008.
  14. B.Raniecki, Z.Mroz, Yield or martensitic phase transformation conditions and dissipation functions for isotropic, pressure insensitive alloys exhibiting SD effect, Acta Mechanica, 195, 81-102, 2008.
  15. Z.Mroz, G.Zietek, Two-surface model of plastic hardening due to phase transformation and cyclic loading, (in Polish) Acta Mechanica et Automatica, 1, 67-70, 2007.
  16. S.Kucharski, Z.Mroz, Identification of yield stress and plastic hardening parameters from a spherical indentation test, International Journal of Mechanical of Sciences, 49, 1238-1250, 2007.
  17. Z.Mroz, J.Maciejewski, Analysis of metal extrusion processes assisted by cyclic deformation, (in Polish) Rudy i Metale Niezelazne, 11, 668-677, 2007.
  18. B.Wilczynski, Z.Mroz, Optimal design of machine components using notch correction and plasticity models, Computers and Structures, 85, 1382-1398, 2007.
  19. M.Bialas, Z.Mroz, An energy model of segmentation cracking of thin films, Mechanics of Materials, 39 (9), 845-864, 2007.
  20. R.Balevicius, R.Kacianauskas, Z.Mroz, I.Sielamowicz, Microscopic and macroscopic analysis of granular material behaviour in 3D flat-bottomed hopper by the discrete element methody, Archives of Mechanics, 59, 231-257, 2007.
  21. K.Kowalczyk-Gajewska, Z.Mroz, R.B.Pecherski, Micromechanical modelling of polycrystalline materials under non-proportional deformation paths, Archives of Metallurgy and Materials, 52, 181-192, 2007.
  22. Z.Mroz, G.Zietek, Modeling of cyclic hardening of metals coupled with martensitic transformation, Archives of Mechanics, 59, 3-20, 2007.
  23. I.Paczelt, Z.Mroz, Optimal shape of contact interfaces due to wear in the steady relative motion, Int. J. Solids Struct., 44, 1-30, 2006.
  24. K.Dems, Z.Mroz, Application of thermographic fields in identification of structural properties and defects, Comp. Assist. Mech. Eng. Sci., 13, 3-19, 2006.
  25. Z.Mroz, D.Bojczuk, Topological sensitivity derivative: application in optimal design and material science, Found. Civil Environm. Eng., 7, 229-250, 2006.
  26. M.Bialas, Z.Mroz, Crack patterns in thin layers Part II. Cyclic loading, Eng. Fract. Mechanics, 73, 939-952, 2006.
  27. M.Bialas, Z.Mroz, Crack patterns in thin layers under temperature loading, Part I. Monotonic loading, Eng. Fract. Mechanics, 73, 917-938, 2006.
  28. Z.Mroz, K.Kowalczyk-Gajewska, J.Maciejewski, R.Pecherski, Tensile or compressive plastic deformation of cylinders assisted by cyclic torsion, Arch. Mech., 58, 497-527, 2006.
  29. R.Balevicius, R.Kacianauskas, Z.Mroz, I. Sielamowicz, Discrete element method applied to multiobjective optimization of discharge flow parameters in hoppers, J. Struct. Multidisc. Optim., 31, 163-175, 2006.
  30. Z.Q.Feng, M.Hjiaj, G. de Saxce, Z.Mroz, Effect of frictional anisoptropy on the quasistatic motion of a deformable solid sliding on a planar surface, Comp. Mechanics, 37, 349-361, 2006.
  31. R.Kacianauskas, Z.Mroz, V.zarnovskij, E.Stupak, Three-dimensional correction of the stress intensity factor for plate with a notch, Int. J. Fracture, 136, 75-98, 2006.
  32. J.Ivanova, V.Valeva, Z.Mroz, Interphase model for a multilayer structures applied in heat conduction problems, J. Theor. Appl. Mech., 34, 15-30, 2005.
  33. D.Bojczuk, Z.Mroz, Determination of optimal actuator forces and positions in smart structures using adjoint method, J. Struct. Multidisc. Optim. 29, 85-101, 2005.
  34. Z.Mroz, A.Garstecki, Optimal loading conditions in the design and identification of structures; Part I: Discrete formulation, J. Struct. Multidisc. Optimization, 29, 1-18, 2005.
  35. Z.Mroz, A.Seweryn, A.Tomczyk, Fatigue crack growth prediction accounting for the damage zone, Fatigue Fract. Engng. Mat. Struct., 28, 61-71,2005.
  36. M.Bialas P.Majerus, R.Herzog, and Z.Mroz, Numerical simulation of segmentation cracking in thermal barrier coatings by means of cohesive zone elements, Mat. Sci. Eng., A412 , 241-251, 2005.
  37. M.Bialas, Z.Mroz, Modeling progressive interface failure under combined normal compression and shear stress, Int. J. Solids Struct., 42, 4436-4467, 2005.
  38. I.Paczelt, Z.Mroz, On optimal contact shapes generated by wear, Int. J. Num. Meth. Engng. 63, 1250-1287, 2005.
  39. Z.Mroz, M.Bialas, A simplified analysis of interface failure under compressive normal stress and monotonic or cyclic shear loading, Int. J. Num. Anal. Meth. Geomech., 29, 337-368, 2005.
  40. A.Drescher, N.Boukpeti, Z.Mroz, Stability and liquefaction failure modes in undrained soil deformation, ASCE J. Geotechn. Division, 15-24, 2004.
  41. N.Boukpeti, Z.Mroz, A. Drescher, Rate effects in the superior sand model, ASCE, J. Geotechn. Division, 1-15, 2004.
  42. Z.Mroz, A.Garstecki, Optimal loading conditions in design and identification of structures, Part I: Discrete formulation, Journ. Struct. Multidisciplinary Optimization, 28,1-18, 2004.
  43. N.Boukpeti, Z.Mroz, A.Drescher, Modeling rate effects in undrained loading of sands, Canadian Geotech. Journ., 41, 342-350, 2004.
  44. S.Kucharski, Z.Mroz, Identification of material parameters by means of compliance moduli in spherical indentation test, Mat. Sci. Eng., A 379, 448-456, 2004.
  45. Z.Mroz, A.Seweryn, A.Tomczyk, Fatigue crack growth prediction accounting for the damage zone, Fatigue Fract. Engng. Mater. Struct., 27, 1-11, 2004.
  46. A.Seweryn, A.Tomczyk, Z.Mroz, A non-local fatigue crack growth model and its experimental verification, Journ. Theoret. Appl. Mech., 42, 69-82, 2004.
  47. M.Hjiaj, Z.Q. Feng, G. De Saxce, Z.Mroz, On the modelling of complex anisotropic frictional contact laws, Int. Journ. Eng. Sci., 42, 1013-1034, 2004.
  48. M.Hjiaj, Z.Q. Feng, G. De Saxce, Z.Mroz, Three-dimensional finite element computations for frictional contact problems with non-associated sliding rule, Int. J. Numerical Meth. Engng., 60, 2045-2076, 2004.
  49. K.Dems, Z.Mroz, Sensitivity analysis and optimal design for structures with thermo-mechanical interfaces, J. Struct. Eng., Cracow Techn. Univ., 2003
  50. S.Stupkiewicz, Z.Mroz, Phenomenological model of real contact area evolution with account for bulk plastic deformation in metal forming, Int. J. Plasticity, 19 (3), 323-344, 2003.
  51. I.Sielamowicz, Z.Mroz, Analysis of pressure evolution in granular materials in convering bins, Task Quarterly, 7, 643-667, 2003.
  52. Z.Mroz, N.Boukpeti, A.Drescher, Constitutive model for static liquefaction, Int. Journ. of Geomechanics, ASCE, 3, 133-144, 2003.
  53. V.Valeva, J.Ivanova, Z.Mroz, Parametric analysis of the decay rate of end effects in heat conduction for multi-layered semi-infinite sandwich structures, Journ.Theoret. Appl. Mech., Bulg. Acad. Sciences, 32, 39-52, 2003.
  54. K.Kowalczyk, Z.Mroz, Description of anisotropy of textured metals using macro and micromodels, J. Phys. VI France, 105, 195-206, 2003.
  55. B.Wilczynski, Z.Mroz, Topology and shape optimization of structure components with fracture constraints, Comp. Assisted Mechanics and Engineering, 10, 239-257, 2003.
  56. Z.Mroz, D.Bojczuk, Finite topology variations in optimal design of structures, Journ. of Struct. Multidisciplinary Optimization, 25, 153-173, 2003.
  57. D.Bojczuk, Z.Mroz, Non-linear sensitivity analysis of discrete structures, Found. of Civil. Environm. Eng., Poznan Univ. Technology, 1, 19-40, 2002.
  58. N.Boukpeti, Z.Mroz, A.Drescher, A model for static liquefaction in triaxial compression and extension, Canadian Geotechn. Journ., 39, 1243-1253, 2002.
  59. Z.Mroz, W.Oliferuk, Energy balance and identification of hardening moduli in plastic deformation processes, Int. Journ. of Plasticity, 18, 379-397, 2002.
  60. M.Hjiaj, G. De Saxce, Z.Mroz, A variational inequality based formulation of the contact law with a non-associated sliding rule, Europ. Journ. Of Mechanics, A/Solids, 21, 49-59, 2002.
  61. Z.Mroz, J.Maciejewski, Failure criteria of anisotropically damaged materials based on the critical plane concept, Int. Journ. Num. Anal. Meth. Geomech., 26, 407-431, 2002.
  62. G.Giambanco, Z.Mroz, The interphase model for the analysis of joints in rock masses and masonary structures, Meccanica, 36, 111-130, 2001.
  63. S.Stupkiewicz, Z.Mroz, Modelling of friction and dilatancy effects at brittle interfaces for monotonic and cyclic loading, Journ. Theoret. Appl. Mech., 39, 707-739, 2001.
  64. S.Pietruszczak, Z.Mroz, On failure criteria for anisopropic cohesive-frictional materials, Int. Journ. Num. Anal. Meth. Geomech., 25, 509-524, 2001.
  65. S.Kucharski, Z.Mroz, Identification of plastic hardening parameters of metals from spherical indentation tests, J. Material Science and Eng., 318, 65-76, 2001.
  66. S.Kucharski, Z.Mroz, Identification of hardening parameters of metals from spherical indentation tests, Journ. Eng. Mat. And Technology, ASME, 123, 245-250, 2001.
  67. D.Lesniewska, Z.Mroz, Study of evolution of shear band systems in sand retained by flexible wall, Int. Journ. Num. Anal. Meth. Geomech., 25, 909-932, 2001.
  68. K.Dems, Z.Mroz, Identification of damage in beam and plate structures using parameter dependent frequency changes, Eng. Computations, 18, 96-120, 2001.
  69. D.Lesniewska, Z.Mroz, Limit equilibrium approach to study evolution of shear band systems in soils, Geotechnique, 50, 521-536, 2000.
  70. S.Pietruszczak, Z.Mroz, Formulation of failure anisotropic criteria incorporating a microstructure tensor, Computers and Geotechnics, 26, 105-112, 2000.
  71. O.Sergeyev, Z.Mroz, Sensitivity analysis and optimal design of three-dimensional frame structures for stress and frequency constraints, Computers and Structures, 75, 167-175, 2000.
  72. Z.Mroz, On the stability of friction contact, J. Theoret. Applied Mechanics, 38, 315-329, 2000.
  73. S.Pietruszczak, Z.Mroz, Formulation of anisotropic failure criteria incorporating a microstructure tensor, Computers and Geotechnics, 26, 105-112, 1999.
  74. P.A.Nawrocki, Z.Mroz, A constitutive model for rock accounting for viscosity and yield stress degradation, Computers and Geotechnics, 25, 247-280, 1999.
  75. S.Stupkiewicz, Z.Mroz, A model of third body abrasive friction and wear in hot metal forming, Wear, 231, 124-138, 1999.
  76. D.Bojczuk, Z.Mroz, Optimal topology and configuration design of trusses with stress and buckling contraints, J. Struct. Optim., 17, 25-35, 1999.
  77. Z.Mroz, A.Seweryn, Non-local failure and damage evolution rule: Application to a dilatant crack model, J. Phys. IV, France, 8, 257-268, 1998.
  78. K.Dems, Z.Mroz, Sensitivity analysis and optimal design of external boundaries and interfaces for heat condition systems, J. Thermal Stresses, 21, 461-488, 1998.
  79. O.Sergeyev, Z.Mroz, Optimal joint positions and stiffness distribution for minimum mass frames with damping constraints, J. Struct. Optim., 26, 231-245, 1998.
  80. D.Bojczuk, Z.Mroz, Optimal design of truss and beam structures with account for topology variation, J. Struct. Machines, 26, 21-40, 1998.
  81. D.Bojczuk, Z.Mroz, On optimal design of supports in beam and frame structures J. Struct. Optim., 16, 47-57, 1998.
  82. Z.Mroz, S.Stupkiewicz, Constitutive model of adhesive and ploughing friction in metal forming processes, Int. J. Mech. Sci., 40, 281-303, 1998.
  83. Z.Mroz, J.Piekarski, Sensitivity analysis and optimal design of non-linear structures, Int. J. Num. Meth. Eng., 42, 1231-1262, 1998.
  84. P.A.Nawrocki, Z.Mroz, A viscoplastic degradation model for rock, Int. J. Rock. Mech. Min. Sci., 35, 991-1000, 1998.
  85. A.Seweryn, Z.Mroz, On the criterion of damage evolution for variable multiaxial stress state , Int. J. Solids Structures, 35, 1589-1616, 1998.
  86. D.Bojczuk, Z.Mroz, Optimal design of trusses with account for topology variation, Mech. Struct. Machines, 26, 21-40, 1997.
  87. A.Seweryn, S.Poskrobko, Z.Mroz, Brittle fracture in plane elements with sharp notches under mixed mode loading, Journ. Eng. Mechanics, ASCE, 123, 535-543, 1997.
  88. Z.Mroz, A.Seweryn, Damage description with related crack initiation and propagation conditions, J. Physique IV, 6, 529-538, 1996.
  89. A.Seweryn, Z.Mroz, Damage accumulation and fracture criterion for complex state loading, Arch. Mach. Design, 43, 269-282, 1996.
  90. K.Dems, Z.Mroz, Optimal segmentation of beam and disk structures, Struct. Optim., 11, 252-260, 1996.
  91. Z.Mroz, D.Bojczuk, Sensitivity analysis of truss and frame structures in critical states, Mech. Struct. Machines, 24, 107-132, 1996.
  92. Z.Mroz, P.Rodzik, On multisurface and integral description of nisotropic hardening evolution in metals, Europ. J. Mech., A/Solids, 15, 1-28, 1996.
  93. Z.Mroz, G.Starzynski, Elasto-plastic analysis of a cylindrical element with surface layer, Arch. Machine Design, 52,189-210, 1996.
  94. Z.Mroz, G.Giambanco, An interface model for analysis of deformation behaviour of discontinuities, Int. J. Num. Anal. Meth. Geom., 20, 1-33,1996.
  95. K.Dems, Z.Mroz, Shape sensitivity in mixed Dirichlet-Neumann boundary-value problems and associated class of path independent integrals, Europ. Journ. of Mech., A/Solids, 14, 169-203, 1995.
  96. Z.Mroz, P.Rodzik, On the control of deformation process by plastic strain, Int. J. of Plasticity, 11, 827-842, 1995.
  97. A.Seweryn, Z.Mroz, A non-local stress failure condition for structural elements under multiaxial loading, Eng. Fract. Mech., 51, 955-973,1995.
  98. Z.X.Li, Z.Mroz, Damage model for viscoplastic softening behaviour; cement paste and concrete, Theor. Appl. Fract. Mech., 20, 105-112, 1994.
  99. R.H.Plaut, Z.Mroz, Upheaval buckling of a mechanism under extermal pressure and compressive loading, Int. Journ. Mech. Eng. Educ., 22, 80-82, 1994.
  100. S.Stupkiewicz, Z.Mroz, Elastic beam on a rigid frictional foundation under monotonic and cyclic loading. Int. J. Solids Struct., 31, 3419-3442, 1994.
  101. Zhao Xia Li, Z.Mroz, Viscoplastic model combining damage and smeared crack for softening of concrete, Acta Mechanica Solida Sinica, 125-136, 1994.
  102. Z.Mroz, Variational methods in sensitivity analysis and optimal design, Europ. Journ. Mech., 13, 115-147, 1994.
  103. Z.Mroz, S.Stupkiewicz, An anisotropic friction and wear model, Int. Solids Struct., 31, 1113-1131, 1994.
  104. D.Bojczuk, Z.Mroz, Sensitivity Analysis for non-linear beams and frames, J. Theor. Appl. Mech., 4, 32, 867-886, 1994.
  105. Z.Mroz, A.Jarzebowski, Phenomenological model of contact slip, Acta Mech., 102, 59-72, 1994.
  106. A.Jarzebowski, Z.Mroz, On slip and memory rules in elastic friction contact problems, Acta Mech., 102, 199-216, 1994.
  107. Z.Mroz, R.T.Haftka, Design sensitivity analysis of non-linear structures in regular and critical states, Int. J. Solids Struct., 31, 2071-2098, 1994.
  108. K.Dems, Z.Mroz, On shape sensitivity approaches in the numerical analysis of structures, Struct. Optimization, 6, 86-93, 1993.
  109. W.Trampczynski, Z.Mroz, Anisotropic hardening model and its application to cyclic loading, Int. J. of Plasticity, 8, 925-946, 1992.
  110. S.Pycko, Z.Mroz, Alternative approach to shake down as a solution of the min-max problem, Acta Mech., 93, 205-222, 1992.
  111. M.Klisinski, Z.Mroz, K.Runesson, Structure of constitutive equations in plasticity for different choices of state and control variables. Int. J. Plasticity, 8, 221-243, 1992.
  112. R.Plaut, Z.Mroz, Unidirectional buckling of a pinned elastica with external pressure, Int. J. Solids and Struct., 29,2091-2100, 1992.
  113. Z.Mroz, R.H.Plaut, On the stability and post-critical behaviour of elastic structures with dry friction, Int. J. Solids and Struct. 29, 1241-1253, 1992.
  114. A.Siemaszko, Z.Mroz, Sensitivity of optimal structures to imperfections and non-linear geometrical effects, Struct. Opt., 99-106, 1991.
  115. K.Dems, Z.Mroz, Sensitivity analysis and optimal of disks and plates with strong discontinuities of kinematic fields, Int. J. Sol. Struct., 29, 437-463, 1991.
  116. Y.Ichikawa, T.Ito, Z.Mroz, A strain localization condition applying mutti-response theory, Ing. Archiv., 60, 542-552, 1990.
  117. R.T.Haftka, G.A.Cohen, Z.Mroz, Derivatives of buckling loads and vibration frequencies with respect to stiffness and initial strain parameters, J. Appl. Mech., 57, 18-24, 1990.
  118. Z.Mroz, E.Majewski, Dynamic model of damage of coal and of some rocks for specification of rock burst mechanism, (in Polish) Arch. Gornictwa, 34, 66-95, 1989.
  119. K.Dems, Z.Mroz, Shape sensitivity analysis and optimal design of physically non-linear plates, Arch. Mech., 41, 481-501, 1989.
  120. K.Dems, Z.Mroz, Sensitivity of buckling load and vibration frequency with respect to shape of stiffened and unstiffened plates, Journ. Struct. and Machines, 17, 431-457, 1989.
  121. Z.Mroz, P.Nawrocki, Deformation and Stability of an Elasto-Plastic Softening Pillar, Rock Mechanics and Rock Engineering, 22, 69-108, 1989.
  122. T.Lekszycki, Z.Mroz, Variational principles in analysis and synthesis of elastic systems with damping, Solid Mechanics Archives, 14, No 3 & 4, 181-202, 1989.
  123. K.Dems, Z.Mroz, D.Szelag, Optimal design of rib-stiffeners in disks and plates, Int. Solids Struct., 25, 973-998, 1989.
  124. Z.Mroz, M.Kowalczyk, Elasto-plastic post-critical analysis of disks under tension, Arch. Mech., 41, 461-480, 1989.
  125. Z.Mroz, W.Trampczynski, R.Hayhurst, Anisotropic creep hardening rule for metals and its application to cyclic loading, Int. Journ. of Plasticity, 4, 417-437, 1988.
  126. M.Kowalczyk, Z.Mroz, Analysis of cracking and crushing mechanisms in a brittle material near opening (in Polish), Arch. Gorn., 33, 403-439, 1988.
  127. Z.Mroz, Problemas actuales y nuevas tendencies en mecanica de geomateriales, Rev. Int. Num.-Math. Cale. Des. Ing., 4, 109-137, 1988.
  128. M.Klisinski, Z.Mroz, Description of inelastic deformation and degradation of concrete, Int. Jour. Solids Struct., 24, 391-416, 1988.
  129. K.Dems, Z.Mroz, Variational approach to sensitivity analysis in thermoelasticity, Joun. Thermal Stress, 10, 283-307, 1987.
  130. K.Dems, Z.Mroz, Variational approach to sensitivity analysis and structural optimization of plane arches, J. Struct. Mech., 15, 297-321, 1987.
  131. G.Szefer Z.Mroz, L.Demkowicz, Variational approach to sensitivity analysis in non-linear elasticity, Arch. Mech., 39, 247-259, 1987.
  132. A.Garstecki, Z.Mroz, Optimal design of supports of elastic structures subjected to loads and initial distortions, Mech. Struct. Machines, 15, 47-68, 1987.
  133. S.Pietruszczak, Z.Mroz, O.C.Zienkiewicz, Application of an anisotropic hardening rule in the numerical analysis of a footing, Studia Geotechn. Mech., 8, 3-24, 1986.
  134. H.Petryk, Z.Mroz, Time derivatives of integrals and functionals specified on varying volume and surface domains, Arch. Mech., 30, 697-724, 1986.
  135. K.Dems, Z.Mroz, On a class of conservation rules associated with sensitivity analysis in linear elasticity, Int. J. Solids of Struct., 22, 737-758, 1986.
  136. Z.Mroz, M.Kamat, R.Plaut, Sensitivity analysis and optimal design of non-linear beams and plates, J. Struct. Mech., 13, 245-266, 1986.
  137. R.Haftka, Z.Mroz, First and second-order sensitivity analysis of linear and non-linear structures, AIAA Journ., 24, 1187-1192, 1986.
  138. K.Dems, Z.Mroz, Variational approach to first and second order sensitivity analysis of elastic structures, Int. J. Num. Meth., 21 , 637-661, 1985.
  139. K.Dems, Z.Mroz, Stability conditions for brittle-plastic structures with propagation damage surface, J. Struct. Mech., 13, 95-122, 1985.
  140. Cz.Goss, S.Kocanda, Z.Mroz, Modelling of cyclic properties of high strength steel in the range of low-cycle loadings, (in Russian), Advances in Mechanics, 7, 95-95-121, 1984.
  141. Z.Mroz, S.Krucinski, Elastoplastic analysis of stress and displacement field in the vicinity of circular tunnel with account for degradation effect, Arch. of Mining, 29, 205-229, 1984.
  142. Z.Mroz, W.A.Trampczynski, On the creep-hardening rule for metals with a memory of maximal prestress, Int. Journ. Solids. Struct., 20, 467-486, 1984.
  143. T.Lekszycki, Z.Mroz, On optimal support reaction in visco-elastic vibrating structures, J. Struct. Mech. 11, 67-79, 1983.
  144. Z.Mroz, Hardening and degradation rules for metals under monotonic and cyclic loading, Proc. ASME J. Eng. Mat. Technology, 105,113-119, 1983.
  145. A.Zubelewicz, Z.Mroz, Numerical analysis of rock burst processes treated as problems of dynamic instability, Rock Mechanics, 16, 253-274, 1983.
  146. K.Dems, Z.Mroz, Variational approach by means of adjoint systems to structural optimization and sensitivity analysis, Part II: Structure Shape Variation, Int. Journ. Solids Struct., 20, 527-552, 1984.
  147. K.Dems, Z.Mroz, Variational approach by means of adjoint system to structural optimization and sensitivity analysis, Part I. Variation of material parameters, Int. J. Sol. Struct., 19, 677-692, 1983.
  148. Z.Mroz, S.Pietruszczak, A constitutive model for sand with an anisotropic hardening rule, Int. J. Num. Anal. Meth. Geomech., 8, 305-320, 1983.
  149. S.Pietruszczak, Z.Mroz, On hardening anisotropy of K0- consolidated clays, Int. J. Num. Anal. Meth. in Geomech., 7, 19-38, 1982.
  150. Z.Mroz, T.Lekszycki, Optimal support reaction in elastic frame structures, Comp. Struct., 14, 179-185, 1981.
  151. J.Gierlinski, Z.Mroz, Optimal design of elastic plates and beams taking large deflections and shear forces into account, Acta Mech., 39, 77-92, 1981.
  152. Z.Mroz, On generalized kinematic hardening rule with memory of maximal prestress, J. Mec. Applique, 5, 241-259, 1981.
  153. Z.Mroz, B.Zadroga, Compression of rock layer of strain softening material, (in Polish) Arch. Hydrotech., 27, 591-627, 1981.
  154. S.Pietruszczak, Z.Mroz, Finite element analysis of deformation of strain softening materials, Int. J. Num. Meth. Eng., 17, 327-334, 1981.
  155. Z.Mroz, V.A.Norris and O.C.Zienkiewicz, Anisotropic critical state model for soils subject to cyclic loading, Geotechnique, 31, 451-469, 1981.
  156. Cz.Goss, S.Kocanda, Z.Mroz, Modelling cyclic response of steel in uniaxial loading for small number of cycles, (in Polish) Bull. Military Eng. Acad. (WAT), 29, 25-51, 1980.
  157. Z.Mroz and A.Mironov, Optimal design of structures for global mechanical constraints, Arch. Mech., 32, 505-516, 1980.
  158. K.Dems and Z.Mroz, Optimal shape design of multicomposite structures, J. Struct. Mech., 8, 309-329, 1980.
  159. Z.Mroz, K.G.Sharma, Finite element applications of viscoplasticity with corner flow rules, Int. J. Num. Meth. Eng., 14, 421-436, 1980.
  160. S.Pietruszczak, Z.Mroz, Numerical analysis of elastic-plastic compression of pillars accounting for material hardening and softening, Int. Rock Mech. Min. Sci., 17, 199-207, 1980.
  161. Z.Mroz, On hypoelasticity and plasticity approaches to constitutive modelling of inelastic behavior of soils, Int. J. Num. Anal. Meth. in Geomech., 4, 45-55, 1980.
  162. D.Kujawski, Z.Mroz, A viscoplastic material model and its application to cyclic loading, Acta Mech., 36, 213-230, 1980.
  163. Z.Mroz, V.A.Norris, O.C.Zienkiewicz, Application of an anisotropic hardening model in the analysis of the elasto-plastic deformation of soils, Geotechnique, 29, 1-34, 1979.
  164. A.Dragon, Z.Mroz, A model for plastic creep of rock-like materials accounting for kinematics of fracture, Int. J. Rock Mech. Min. Eng., 16, 253-259, 1979.
  165. A.Dragon, Z.Mroz, A continuum model for plastic-brittle behavior of rock and concrete, Int. J. Eng. Sci., 17, 121-137, 1979.
  166. K.Dems, Z.Mroz, Multiparameter structural shape optimization by the finite element method, Int. J. Num. Meth. Eng., 13, 247-263, 1979.
  167. Z.Mroz, F.G.Shamijev, Simplified yield conditions for fibre reinforced plates and shells, Arch. Civ. Eng., 25, 1979.
  168. E.F.Masur, Z.Mroz, On non-stationary optimality conditions in structural design, Int. J. Solids Struct., 19, 503-512, 1979.
  169. D.Szelag, Z.Mroz, Optimal design of vibrating beams with unspecified support action, Comp. Appl. Math. Eng., 19, 333-349, 1979.
  170. Z.Mroz, V.A.Norris, O.C.Zienkiewicz, An anisotropic hardening model for soils and its application to cyclic loading, Int. J. Num. Anal. Math. in Geomech., 2, 203-221, 1978.
  171. R.Michalowski, Z.Mroz, Associated and non-associated sliding rules in contact friction problems, Arch. Mech., 30, 259-276, 1978.
  172. U.Lepik, Z.Mroz, Optimal design of impulsively loaded plastic beams for asymmetric mode motion, Int. J. Solids Struct., 14, 841-850, 1978.
  173. G.I.N.Rozvany, Z.Mroz, Analytical methods of structural optimization, Appl. Mech. Revs., 30, 1461-1470, 1977.
  174. D.Szelag, Z.Mroz, Optimal design of elastic beams with unspecified support positions, ZAMM, 58, 501-510, 1977.
  175. G.I.N.Rozvany, Z.Mroz, Column design: optimization of support conditions and segmentation, J. Struct. Mech., 5, 279-290, 1977.
  176. Z.Mroz, S.Pietruszczak, Flexure and extension of concrete beams with polymer impregnated external layers (in Polish), Arch. Civ. Eng., 23, 125-144, 1977.
  177. Z.Mroz, S.Pietruszczak, Description of polymer impregnated concrete (in Polish), Arch. Civ. Eng., 23, 107-124, 1977.
  178. Z.Mroz, U.Lepik, Optimal design of viscous structures under impulsive loading (in Russian), Mech. Polimerov, 6, 1021-1028, 1977.
  179. U.Lepik, Z.Mroz, Optimal design of plastic structures under impulsive and dynamic pressure, Int. J. Solids Struct., 13, 657-674, 1977.
  180. W.Fryze, Z.Mroz, Yield conditions of fiber-reinforced materials (in Polish), Eng. Trans., 25, 201-234, 1977.
  181. Z.Mroz, L.Winnicki, Elasto-plastic analysis of stress distribution in rock mass in the vicinity of mining excavation (in Polish), Arch. Mining, 22, 3-30, 1977.
  182. A.Dragon, Z.Mroz, On the plastic-brittle behavior of rock and concrete, Mech. Res. Comm., 3, 81-92, 1976.
  183. Z.Mroz, H.P.Shrivastava, R.N.Dubey, On non-linear kinematic hardening model, Acta Mechanica, 25, 51-61, 1976.
  184. Z.Mroz, B.Raniecki, A derivation of the uniqueness conditions in coupled thermo-plasticity, Int. J. Eng. Sci., 14, 395-401, 1976.
  185. Z.Mroz, B.Raniecki, On the uniqueness problem in coupled thermo-plasticiy, Int. J. Eng. Sci., 14, 211, 1976.
  186. M.Grzymkowski, Z.Mroz, Slip-line solutions of axisymmetric problems of plate compression, Eng. Trans., 24, 171-183, 1976.
  187. Z.Mroz, A.Garstecki, Optimal design of structures with unspecified loading distribution, J. Opt. Theory and Appl., (JOTA), 20, 359-380, 1976.
  188. Z.Mroz, N.C.Lind, Simplified theories of cyclic plasticity, Acta Mechanica, 22, 131-152, 1975.
  189. Z.Mroz, G.I.N.Rozvany, Optimal design of structures with variable support conditions, Journal Opt. Theory and Appl., 15, 85-101, 1975.
  190. Z.Mroz, B.Raniecki, A note on variational principles in coupled thermoplasticity, Bull. Acad. Sci., 23, No3, 133-139, 1975.
  191. G.I.N.Rozvany, Z.Mroz, Optimal design taking costs of joints into account, J. Eng. Mech. Div. Proc. ASCE, 101, 917-922, 1975.
  192. Z.Mroz, B.Raniecki, Variational principles in uncoupled thermoplasticity, Inter. Journ. Eng. Sci., 11, 1153-1141, 1973.
  193. Z.Mroz, Multiparameter optimal design of plates and shells, J.Struct. Mech. 1, 371-392, 1973.
  194. Z.Mroz. J.E.Taylor, Prestress for maximum strength, Int. Journ. Solids and Struct., 9, 1535-1541, 1973.
  195. H.P.Shrivastava, Z.Mroz, R.N.Dubey, Yield criterion and second order effects on plane stress, Acta Mechanica, 17, 137-143, 1973.
  196. R.N.Dubey, Z. Mroz On the relation between stress and strain rates for elastic-plastic solids, Archives of Mechanics, 25, 383-388, 1973.
  197. Z.Mroz, Cz.Goss, On composite models of plastic hardening, (in Polish), Mech. Teoret. i Stos., 2, 159-279, 1972.
  198. M.Grzymkowski, Z. Mroz, Limit equilibrium method for upper bound in plane metal working problems with account for friction(in Polish), Arch. Hutnictwa, 17, 83-98, 1972.
  199. Z.Mroz, K.Kwaszczynska, Some boundary value problems for density hardening materials (in Polish), Rozpr. Inz., 19, 15-42, 1971.
  200. Z.Mroz, Cz.Szymanski, A simplified theory of flow of granular materials in converging channels (in Polish), Arch. Inz. Ladowej, 17, 555-578, 1971.
  201. Z.Mroz, Optimal design of structures of composite materials, Int. Journ. of Solids and Struct., 6, 856-870, 1970.
  202. Z.Mroz, Optimal design of structures subject to dynamic, harmonically warying loads, Zeitschr. Angew. Math. u. Mechanik /ZAMM/, 50, 303-309, 1970.
  203. W.Kozlowski, Z.Mroz, Optimal design of disks subject to geometrical constraints, Inter. Journ. Mech. Sci., 12, 1007-1021, 1970.
  204. W.Kozlowski, Z.Mroz, Optimal design of solid plates, Int. Journ. Solids Struct., 5, 781-794, 1969.
  205. Z.Mroz, A.Drescher, Limit plasticity approach to some cases of flow of bulk solids, Journal Eng. for Industry, ASME, 91, 357-364, 1969.
  206. K.Kwaszczynska, Z.Mroz, A.Drescher, Analysis of compression of short cylinders of Coulomb material, Int. Journ. Mech. Sci., 11, 145-158, 1969.
  207. Z.Mroz, An attempt to describe the behaviour of metals under cyclic loads using a more general workhardening model, Acta Mechanica, 7, 199-212, 1969.
  208. Z.Mroz, Methods of theory of plasticity in the analysis of motion granular materials (in Polish), Bull. Central Lab. of Minerals, No 3, 149-167, 1968.
  209. Z.Mroz, K.Kwaszczynska, Axially symmetric plastic flow of metals treated by the graphical methods, Arch. Inz. Ladowej, 14, 27-37, 1968.
  210. Z.Mroz, K.Kwaszczynska, Plastic compression of short cylinders between rigid plates, Arch. Mech. Stos., 19, 1967.
  211. Z.Mroz, On the description of anisotropic workhardening, J. Mech. Phys. Solids, 15, 163-175, 1967.
  212. A.Drescher, K.Kwaszczynska, Z.Mroz, Statics and kinematics of the granular medium in the case of wedge indentation, Arch. Mech. Stos., 19, 99-113, 1967.
  213. Z.Mroz, Graphical solution of axially symmetric problems of plastic flow, Zeitshr. Angew. Math. u. Physik, 18, 219-236, 1967.
  214. Z.Mroz, On the optimum design of reinforced slabs, Acta Mechanica, 3, 34-55, 1967.
  215. Z.Mroz, On forms of constitutive laws for elastic-plastic solids, Arch. Mech. Stos., 18, 3-35, 1966.
  216. Z.Mroz, Non-linear flow rules in the theory of plasticity, Bull. Acad. Sci. Pol., 12, 531-539, 1964.
  217. Z.Mroz, Admissible loading paths in the deformation theories of plasticity, Arch. Mech. Stos., 16, 1964.
  218. Z.Mroz, Xu Bing-ye, The load carrying capacities of symmetrically loaded spherical shells, Arch. Mech. Stos., 15, 245-266, 1963.
  219. Z.Mroz, Non-associated flow laws in plasticity, Journ. de Mecanique, 2, 21-42, 1963, (also in Russian Sbornik Pierovodov Mechanika), 1964.
  220. Z.Mroz, Limit analysis of plastic structures subject to boundary variations, Arch. Mech. Stos., 15, 63-76, 1963.
  221. Z.Mroz, On a problem of the minimum-weight design, Quart Appl. Mech., 19, 127-135, 1961.
  222. Z.Mroz, A.Sawczuk, Limit analysis of annular plates fixod at both edges (in Russian), Izv. Ak. Nauk ZSRR, OTN, No2, 72-78, 1960.
  223. Z.Mroz, The load-carrying capacity of orthotropic shells, Arch. Mech. Stos., 12, 85-107, 1960.
  224. Z.Mroz, Plastic deformation of annular plates under dynanic loads, Arch. Mech. Stos., 10, 499-516, 1958.
  225. Z.Mroz, Limit analysis and optimal design of annular plates, (in Polish), Rozpr. Inz., 605-626, 1958.
  226. W.Olszak, Z.Mroz, Note on the completeness of elastic-plastic solution to certain boundary-value problems for the eccentric ring, Arch.Mech. Stos., 10, 441-444, 1958.
  227. W.Olszak, Mroz, Elastic bending of circular plates with eccentric holes /application of the method of inversion/, Arch. Mech. Stosowanej, 9, 125-153, 1957, also Bull. Acad. Sci. Pol., 5, 1957.

Monographs

  1. Z.Mroz, J.Maciejewski, Failure criteria and compliance variation of anisotropically damaged materials, in "Anisotropic Behaviour Damage of Materials", Eds. J.J. Skrzypek, A. Ganczarski, Springer Verlag, 75-113, 2002
  2. Z.Mroz, Strength Theories, in "Comprehensive Structural Integrity", vol.2: "Fundamental Theories and Mechanisms od Failure", Eds. B. Karihaloo, W.G. Knauss, Elsevier Publ., 1-47, 2003.
  3. Computer Methods in Mechanics (in Polish) author of 2 chapters, PWN, Ed. M.Kleiber. English edition by Springer Verl., 1998.
  4. M.Klisinski, Z.Mroz, Inelastic deformation and damage of concrete (in Polish), Poznan Techn. Univ. Publ., No 193, 1988.
  5. W.Derski, R.Izbicki, I.Kisiel, Z.Mroz, Rock and Soil Mechanics, PWN-Elsevier Sci. Publ., 720 pages, 1988.
  6. W.Derski, R.Izbicki, I.Kisiel, Z.Mroz, Rock and Soil Mechanics, (in Polish), PWN, 1982.
  7. Z.Mroz, A.Drescher, Theory of plasticity of granular materials (in Polish), Ossolineum, 1976.
  8. R.Izbicki, Z.Mroz, Methods of limit analysis in rock and soil mechanics (in Polish), PWN, 1976.
  9. Z.Mroz, Mathematical models of inelastic material behaviour, University of Waterloo Press, 1973.
  10. Theory of Plasticity, (authoring of two chapters) PWN, 1966 (in Polish), (also Romanian edition).
  11. W.Olszak, Z.Mroz, P.Perzyna, Recent trends of development in the theory of plasticity, Perg. Press, 1963.( Also: Russian and Czech editions).

Special volume or book publications

  1. J.Maciejewski, Z.Mroz, Analysis of deformation and damage processes in soil-tool interaction problems, Bifurcation and Degradation of Geomaterials, Springer Verlag, Ed. G. Wen, 325-345, 2011.
  2. Z.Mroz, J.Maciejewski, Critical plane approach to analysis of failure criteria for anisotropic geomaterials, Bifurcation and Degradation of Geomaterials, Springer Verlag, Ed. G. Wen, 69-89, 2011.
  3. M.Bialas, Z.Mroz, Damage modelling at material interfaces, CISM Lect. Notes No.470, 121-176, 2005.
  4. Z.Mroz, K.Dems, Identification of damage in beam and plate structures using parameter dependent modal changes and thermographic methods, CISM Lect. Notes, No 469 Parameter Identification in Materials and Structures, Springer Verl. Eds. Z. Mroz, G. Stavroulakis, 95-139, 2005.
  5. Z.Mroz, K.Dems, Identification of damage in beam and plate structures using parameter dependent modal changes and thermographic methods, CISM Lecture Notes, Damage Identification in Materials and Structures, Springer Verlag, Eds. Z.Mroz, G.Stavroulakis, 1-44, 2004.
  6. D.Lesniewska, Z.Mroz, Shear bands in soil deformation processes, in "Bifurcations & Instabilities in Geomechanics", Ed. J.F. Labuz, A. Drescher, A.A. Balkema Publ., 109-121, 2003.
  7. Z.Mroz, Contact friction models and stability problems, CISM Courses and Lecture Noes, "Friction and Instabilities", Eds. J.A.C. Martins and M. Raous, Springer, Wien-New York, 137-179, 2002.
  8. Z.Mroz, Multisurface hardening model for monotonic and cyclic response of metals, "Mechanics of Materials", Ed. J. Lemaitre, Interscience Publ., 2001.
  9. Z.Mroz, Multisurface hardening model for monotonic and cyclic response of metals, in Handbook of Mechanics of Materials", Interscience Publ., Ed. J. Lemaitre, 2000.
  10. Z.Mroz, A.Seweryn, Multiaxial damage and fatigue conditions, in "Modelling of Damage and Fracture Processes in Engineering Materials, Inst. Fund. Technological Research, Eds. M. Basista and W. K. Nowacki, Part IV, 115-180, 1999.
  11. Z.Mroz, Elastoplastic and viscoplastic constitutive models for granular materials, CISM Courses, Springer Verlag, 269-339, 1998.
  12. Z.Mroz, A.Seweryn, Damage evolution rule for multiaxial variable loading, in "Damage Mechanics in Engineering Materials", Eds. G.Z.Voyiadis et al. Elsevier Science, 145-162, 1998.
  13. Z.Mroz, J.Piekarski, First and second order design sensitivity at a bifurcation point, Advances in Struct. Optim., Ed. J.Herskovits, Kluwer Acad. Publ., 349-380, 1995.
  14. Z.Mroz, J.Maciejewski, Post-critical response of soils and shear band evolution, Localisation and Bifurcation Theory for Soils and Rocks, Ed. R.Chambon et al., Balkema, 19-35, 1994.
  15. Z.Mroz, P. Rodzik, Constitutive models for inelastic cyclic behaviour of metals, in "Huber´s Yield Criterion in Plasticity", Ed. M.Pietrzyk et al., AGH Publ. Cracow, 9-27, 1994.
  16. Z.Mroz, Sensitivity analysis for vibration and stability of structures, New Developments in Struct. Mech, Ed. G.Manfredi, Univ. Catania Press, 229-247, 1994.
  17. Z.Mroz, Sensitivity analysis:distributed systems, ''Structural Optimization, Status and Promise'', Progr. in Astronautics and Aeronautics, Ed. M.P.Kamat, 150, Chapter 13, 317-348, 1993.
  18. A.Siemaszko, Z.Mroz, Optimal plastic design of imperfect frame structures, in ''Progress in Structural Design'', Eds D.E.Grierson et al., Kluwer, Acad. Publ., 353-370, 1991.
  19. Z.Mroz, A.Jemiolo, Constitutive modelling of geomaterials with account for deformational anisotropy, in ''Finite Elements in the 90'', Eds. E.Onate et al, Springer Verlag, 274-284, 1991.
  20. Z.Mroz, A.Zacharski, Motion of gas and rock mass in the first phase of rock outburst, (in Polish), Rock and Gas Outburst Vol.3, Ed. J.Litwiniszyn, AGH Publ.,1991.
  21. B.Raniecki, Z.Mroz, On the strain-induced anisotropy and texture in rigid-plastic solids, in ''Inelastic Solids and Structures'', A.Sawczuk Memorial Volume, Eds. M.Kleiber, A.Konig, Prineridge Press, Swansea, 13-32, 1989.
  22. Z.Mroz, R.T.Haftka, Sensitivity of buckling loads and vibration frequencies of plates, Studies in Appl. Mech. 19, Buckling of Structures, Ed. I, Elishakoff et al., Elsevier Appl. Sci., 255-267, 1988.
  23. Z.Mroz, Phenomenological constitutive models for metals, in ''Modelling of Small Deformations of Metals'', Eds. J.Zarka and J.Gittus, Elsevier Appl. Sci. Publ., 1986.
  24. Z.Mroz, Variational approach to shape sensitivity analysis and optimal design, in ''The Optimum Shape'', Intersc. Publ., Ed. M.Botkin, 1986.
  25. Z.Mroz, Current trends and new directions in mechanics of geomaterials in "Mechanics of Geomaterials", Eds. Z.Bazant, J.Wiley and Sons, 539-566, 1985.
  26. O.C.Zienkiewicz, Z.Mroz, Generalized plasticity formulation and application to geomechanics, in ''Constitutive Models for Engineering Materials'', J.Wiley and Sons, Eds. C.S.Desai, R.H.Gallagher, 655-680, 1984.
  27. Z.Mroz, O.C.Zienkiewicz, Uniform formulation of constitutive models for clays and sands, in ''Constitutive Models for Engineering Materials'', Eds. C.S.Desai and R.Gallagher, J.Wiley, 620-655, 1984.
  28. Z.Mroz, V.A.Norris, Elastoplastic and viscoplastic constitutive models for soils with application to cyclic loading, in "Soil Mechanics-Transient and Cyclic Loads", Eds. G.N.Pande, O.C.Zienkiewicz, J.Wiley, 173-217, 1982.
  29. Z.Mroz, Deformation and flow of granular materials, Proc. ICTAM Int. Congr. Theor. Appl. Mech., Toronto, North Holland Publ. Co., 119-132, 1980.
  30. Z.Mroz, Cz.Szymanski, Non-associated flow rules in description of flow of granular materials, CISM, Udine, 1974.
  31. Z.Mroz, Optimal design criteria for reinforced plates and shells, Proc. Intern. Symp. ''Foundations of Plasticity'', Ed. A.Sawczuk, Noordhoff Intern. Publ., 425-429, 1972.
  32. Z.Mroz, Mathematical models of inelastic concrete behaviour, in ''Inelasticity and non-linearity of structural concrete'', Univ. of Waterloo Press, 47-72, 1972.
  33. Z.Mroz, Optimal design of structures for limit load constraint (in Polish), Ossolineum, ''Methods of optimization of deformable systems'', 2, 1969.
  34. W.Olszak, Z.Mroz, The method of inversion in the theory of plates, Assoc. Ponts. Charp., 399-424, 1956.

Volume Editing

  1. Z.Mroz, T.Sadowski (Editors). Problems of fracture and cutting of materials, Lublin Techn. Univ., 1998, 114 pages
  2. A.Jakowluk, Z.Mroz, Proc. 6th Int. Symp. "Creep and Coupled Processes", Bialystok Tech. Univ., 1998, 468 pages.
  3. E.Macha, Z.Mroz (Editors), Proc. 5-th Int. Conf. On Biaxial/Multiaxial Fatigue and Fracture, Cracow 1997, Tech. Univ. of Opole, 1310 pages.
  4. W.Gutkowski, Z.Mroz (Editors), Structural and Multidisciplinary Optimization, Proc. WCSMO-2, Zakopane, 1997, IPPT-PAN, 1018 pages.
  5. Z.Mroz, D.Weichert, S.Dorosz (Editors), Inelastic behaviour of structures under cyclic loading, Kluwer Publ., 496 pages, 1995.
  6. A.Sawczuk, Z.Mroz (Editors), Optimization in Structural Design, Springer Verl., 1975, 585 pages,

Conference publications

  1. Mroz K.M., Mroz Z., Crack growth modes in inhomogeneous materials: analysis of bi- and multimaterial interfaces, Proc. Int. Symp. "Crack Paths", Forni di Sopra, Italy, March 7-9, 2011, pp.17-25.
  2. Zietek G., Mroz Z., Cyclically hardening description of austenitic steels with martensite transformation caused by temperature and stress variation, Proc.VI-th Int.Symp. on Mechanics of Materials and Structures, May 30- June 2, 2011, Augustow, pp. 183-184.
  3. Balevicius R., Sielamowicz I., Mroz Z., Kacianauskas R., Investigation on the discharge process in a flat-bottomed beam: the experimental measurements and theoretical predictions, CMM-2011-Computer Methods in Mechanics, May, 9-12, Warsaw, pp.117-118.
  4. Dems K., Mroz Z., Analysis and design of thermo-mechanical interfaces, CMM-2011-Computer Methods in Mechanics, May 9-12, Warsaw, pp.163-164.
  5. Mroz Z., Bojczuk D., Topological sensitivity derivative and its application to anaysis of nucleation and growth of inclusions and voids in structures, CMM-2011-Computer Methods in Mechanics, May 9-12, 2011, Warsaw, pp.375-376.
  6. I. Paczelt, Z. Mroz, Thermo-elastic analysis of steady wear problems. IV European Conf. On Computational Mechanics, Paris, May 16-21, 2010.
  7. I. Paczelt, Z. Mroz, S. Kucharski, Numerical analysis of wear processes in steady and quasi-steady states, 37th Solid Mechanics Conference-SolMech2010, Warsaw, September 6-10, 2010.
  8. G. Zietek, Z. Mroz, Thermomechanical model of cyclic hardening for austenitic steel with martensitic transformation, 37th Solid Mechanics Conference-SolMech2010, Warsaw, September 6-10, 2010.
  9. J. Maciejewski, Z. Mroz, Deformation response of geomaterial interfaces coupled with progressive damage and wear, 37th Solid Mechanics Conference-SolMech2010, Warsaw, September 6-10, 2010.
  10. Z.Mroz, Material contact interfaces: numerical modelling of frictional slip, wear and damage, Proc. Int. Conf. Computer Methods in Mechanics, Zielona Gora, CMM-2009.
  11. Z.Mroz, G.Zietek, Termomechaniczny model wzmocnienia materialu dla stali austenistycznych z przemiana fazowa, Mat. V Miedz. Symp. Mechaniki Zniszczenia Materialow i Konstrukcji, Augustow, Ed. A. Seweryn, Pol. Bialostocka, str. 86-88, 2009.
  12. K.Dems, Z.Mroz, Damage identification using modal or static analysis with additional control parameters, Proc. ECCOMAS, Intern. Symp. on Inverse Problems in Mechanics of Structures and Materials, (IMP), lancut, 2009.
  13. K.Mroz, Z.Mroz, The crack path evolution for monotonic and cyclic loading, Proc. Int. Conf. Crack Paths (CP2009), Vicenza (Italy), Ed. A. Carpinteri, 41-59, 2009.
  14. Z.Mroz, Modeling damage, friction slip and wear at material interfaces, International Conference ASCE Engineering Mechanics Institute, Minneapolis, USA, 2008.
  15. J.Maciejewski, Z.Mroz, Analysis of deformation and damage processes in soil-tool interaction problems, Proc. International Workshop on Bifurcations and Degradations in Geomaterials, Canada, Lake Louise, 2008.
  16. Z.Mroz, J.Maciejewski, Critical plane approach to analysis of failure criteria and damage evolution rules in anisotropic materials, Proc. International Workshop on Bifurcations and Degradations in Geomaterials, Lake Louise, Canada, 2008.
  17. G.Zietek, Z.Mroz, Description of cyclic hardening of materials with plasticity induced martensitic transformation, SolMech08, Gdansk, 2008.
  18. B.Wilczynski, Z.Mroz, Fatigue shape optimization of notched machine parts made of two-phase or composite materials, Proc. 8th World Congres Comp. Mech. (WCCM8), Venice, 2008.
  19. S.Kucharski, Z.Mroz, Identification of yield stress and hardening parameters by the spherical indentification test, Proc. I Kongres Mechaniki Polskiej, (in Polish) Eds.. J. Kubik, W. Kurnik, W. K. Nowacki, Warszawa, 2007.
  20. G.Zietek, Z.Mroz, Modelling of plastic hardening of metals with account for phase transformation, Proc. I Kongres Mechaniki Polskiej, (in Polish), Eds. J. Kubik, W. Kurnik, W.K.Nowacki, Warszawa, 2007.
  21. J.Maciejewski, Z.Mroz, Modelling of plastic deformation of metals for complex loading paths, Proc. I Kongres Mechaniki Polskiej, (in Polish), Eds. J. Kubik, W. Kurnik, W.K.Nowacki, Warszawa, 2007.
  22. D.Bojczuk, Z.Mroz, Some applications of topological sensitivity derivative, Proc. 7th Word Congress of Struct. Multidisciplinary Optimization, COEX, Seoul, Korea, 1817-1826, 2007.
  23. M.Bialas, Z.Mroz, An energy model of segmentation cracking of SiOX thin film on a polymer substrate, Advanced Ceramic Coatings and Interfaces II, Ceramic Eng. and Science Proc. Vol.28, issue 3, 231-241, Eds: J.Dalem and D.Zhu, Wiley, 2007.
  24. B.Wilczynski, Z.Mroz, Optimal design of notched machine parts with respect to fracture and low cycle fatigue, Proc. 9th Int. Conf. Comput. Plasticity, Complas IX, Eds. E. Onate, D.R.J. Owen, CIMNE, Barcelona, 2007.
  25. B.Wilczynski, Z.Mroz, Optimal design of machine components for low-cycle fatigue response, Europ. Comp. Mech. Conf., Lisbona, 2006.
  26. M.Bialas, Z.Mroz, Crack and delamination patterns in thin layers under monotonic and cyclic temperature loading, Proc. IUTAM Symp. "Damage and Fracture of Composite Materials", Ed. T. Sadowski, Springer Acad. Publ., Dordrecht, The Netherlands, Addendum, 3-10, 2006.
  27. V.Valeva, J.Ivanova, Z.Mroz, Heat conduction in layered structural with interfacial debonding, Part II. Middle angular layers, Proc. Nat. Conf. Theor. Appl. Mech., Varna, 1, 391-395, 2005.
  28. V.Valeva, J.Ivanova, Z.Mroz, Heat conduction in layered structural with interfacial debonding, Part I. Parallel layers, Proc. Nat. Conf. Theor. Appl. Mech., Varna, 1, 385-390, 2005.
  29. Z.Mroz, G.Zietek, Modelling of plastic hardening for cyclic deformation inducing martensite transformation, Proc. III Symp. Mechaniki Zniszczenia Materialow i Konstrukcji, Augustow, Pol. Bialostocka, (in Polish), Ed. A. Seweryn, 249-253, 2005.
  30. R.Balevicius, R.Kacianauskas, Z.Mroz, I.Sielamowicz, Modelling of filling and discharge of granular materials in hoppers by discrete element method: Optimization of some flow parameters, Proc. 6-th World Congress of Struct. Multidisc. Optim., Rio de Janeiro, Ed. J. Herskovitz, 2005.
  31. B.Wilczynski, Z.Mroz, Optimal design of machine components based on damage tolerant philosophy, Proc. Conf. Comp. Meth. Mech., Czestochowa, Poland, 1-9, 2005.
  32. Z.Mroz, A.Baltov, Modeling hardening effects and grain size evolution in metals induced by severe plastic deformation, Nanostructured Materials by High Pressure Severe Plastic Deformation, Eds. Y.T.Zhu, V.Varyukhin, Springer Verl., 151-159, 2005.
  33. I.Sielamowicz, Z.Mroz, Analysis of stress evolution in converging hoppers, International Workshop, Characterization of granular agro-materials and food powders, Institute of Agrophysics Polish Academy of Sciences, Lublin 29-30, 2004.
  34. I.Sielamowicz, Z.Mroz, Analysis of Pressure Evolution in Granular Materials in Wedge-Shaped Hooppers During Filling and Emptying processes, International Congress for Particle Technology, Partec 2004, Nurnberg, Germany, 16-18.03, 2004.
  35. Z.Mroz, B.Wilczynski, Optimal design with account for crack growth and fatigue life constrains, Proc.2nd Int. Conf. Lifetime-oriented Design Concepts, Ed. F. Stanenberg et al., SFB 398, Ruhr Univ. Bochum, 21-30, 2004.
  36. Z.Mroz, W.Nowacki, J.Maciejewski, Centre of Excellence AMAS and continuation of its activity, Mat. Konf. Centra Doskonalosci - ich rola w badaniach i wzroscie konkurencyjnosci gospodarki, Pol. Wroclawska CAMT., (in Polish), Ed. J. Koch, 19-34, 2004.
  37. J.Maciejewski, Z.Mroz, Limit analysis method for anisotropic and non-linear geomaterials, Geotechnika w Budownictwie i Gornictwie, (in Polish), Eds. W. Brzakala, J. Burta, S.Galczynski, Oficyna Wydawnicza Pol. Wrocl., 15-35, 2003.
  38. A.Seweryn, A.Tomczyk, Z.Mroz, Verification of non-local fatigue crack growth criterion in uniaxial loading, Mat. II Symp. Mechaniki Zniszczenia Materialow I Konstrukcji, Augustow, (in Polish), Ed. A. Seweryn, Wyd. Pol. Bialostockiej, 341-347, 2003.
  39. A.Seweryn, R.Kulczycki-zyhajlo, Z.Mroz, Model ciala z mikropeknieciami uwzgledniajacy efekty tarcia i dylatacji, Mat. II Symp. Mechaniki Zniszczenia Materialow i Konstrukcji, Augustow, Ed. A. Seweryn, Wyd. Pol. Bialostockiej, 337-341, 2003.
  40. Z.Mroz, D.Bojczuk, Optimal design of smart structures using adjoint methods, Proc. 5th World Congr. Struct. Multidisciplinary Optim., Int. J. Sol. Structures, del Isola, Wlochy, Ed. C. Cinquini, 149-159, 2003.
  41. Z.Mroz, K.Dems, Application of thermographic methods in identification of structure properties, Proc. 5th World Congr. Struct. Multidisciplinary Optim., Int. J. Sol. Structures, del Isola, Wlochy, Ed. C. Cinquini, 128-138, 2003.
  42. Z.Mroz, A.Seweryn, A. Tomczyk, Fatigue crack growth prediction by the non-local critical plane model, Proc. Int. Symp. "Fatigue Crack Paths", Parma, Wlochy, Ed. A. Carpinteri, 212-232, 2003.
  43. Z.Mroz, H.Petryk, Problem of mechanics of new materials in "Nauki Techniczne u Progu XXI Wiek", IPPT, (in Polish), Ed. M. Kleiber, 7-21, 2002.
  44. B.Wilczynski, Z.Mroz, Optimal shape design of notched components for low cycle fatigue constraints, Proc. 5-th World Congr. Comp. Mech., Ed. H. A. Mang et al., Vienna, Austria, 2002.
  45. S.Stupkiewicz, Z.Mroz, Phenomenological model of contact area evolution with account for bulk plastic deformation in metal forming, Proc. 3-rd Contact Mech. Intern. Symp., J. A. C. Martins (Ed.), Kluwer, Acad. Publ., 2002.
  46. S.Stupkiewicz, Z.Mroz, Frictional model accounting for bulk deformation in metal forming, Proc. Int. Conf. Numisheet, Korea, pp.459-464, 2002.
  47. D.Lesniewska, Z.Mroz, Numerical analysis of shear band pattern in soils retained by flexible walls, Int. Workshop on Instabilities in Geomechanics, Univ. of Minnesota, Minneapolis, 2002.
  48. K.Kowalczyk, Z.Mroz, Description of anisotropy of textured metals using macro and micromodels, Proc. Euromech-Mecamat: Non-linear Mechanics of Anisotropic Materials, Ed. S. Cescotto, Univ. Liege, 305-313, 2002.
  49. Z.Mroz, J.Maciejewski, Critical plane method for decription of damage and failure conditions, Proc. Int. Symp."New Challenges in Mesomechanics", Aalborg, Denmark, Ed. R.Pyrz et al., 213-222, 2002.
  50. R.Wilczynski, Z.Mroz, Optimal design for minimization of stress intensity factors with account for stiffness constraints, Proc. WCSMO-4, Dalian, Ed. G. D. Cheng, 2001.
  51. K.Dems, Z.Mroz, Application of path independent sensitivity integrals in thermo-graphic identification of defects, Proc. WCSMO-4, Dalian, Ed. G. D. Cheng, 2001.
  52. S.Stupkiewicz, Z.Mroz, Phenomenological model of friction accounting for subsurface plastic deformation in metal forming, Proc. 3rd Contact Mechanics Int. Symp., "Contact Mechanics", Peniche, Portugal, Eds. J. A. C. Martins and M. D. P. Marques, Kluwer Akademic Publishers, 179-186, 2001.
  53. Z.Mroz, M.Bialas, Modelling of progresive interface failure under monotonic and cyclic loading, Proc. IUTAM Symp. Analytical and Computational Fracture Mechanics of Non-Homogeneous Materials, Ed. B. Karihaloo, Kluwer Ac. Publ., 2001.
  54. Z.Mroz, D.Bojczuk, Topological derivative and its application in optimal design of truss and beam structures for displacement, stress and buckling constraints , Topology Optimization of Structures and Continua, NATO Sci., Ser. II, vol. 7, Eds. G. I. N. Rozvany, N. Olhoff, Kluwer Ac. Publ., 91-107, 2000.
  55. Z.Mroz, A.Seweryn, A.Tomczyk, A non local critical plane model for the analysis of fatigue crack propagation, Continuous Damage and Fracture, Ed. A. Benallal, Elsevier, 373-384, 2000.
  56. K.Dems, Z.Mroz, Optimization of thermomechanical interfaces, Proc. of WCSMO-3, Buffalo Univ., 1999.
  57. Z.Mroz, D.Bojczuk, Topological derivative concept in optimal design of structures, Proc. WCSMO-3, Univ. of Buffalo, 1999.
  58. Z.Mroz, K.Dems, Sensitivity analysis and design of thermo-mechanical interfaces, Proc. 3-rd Int. Congress " Thermal Stress 99", Eds. J. Skrzypek and R.B.Hetnarski, 491-494, 1999.
  59. Z.Mroz, S.Stupkiewicz, Thermoplastic deformation at interfaces in metal forming processes, Proc. IUTAM Symp. "Micro and Macro - Structural Aspect of Thermoplasticity", Eds. O. T.Bruhns, K.Stein, Kluwer Acad. Publ., 489-498, 1998.
  60. Z.Mroz, T.Lekszycki, Identification of damage in structures using parameter dependent modal response, Proc. ISMA23:Noise and Vibration Engineering, Leuven, Ed. P.Sas, Vol.I, 121-127, 1998.
  61. Z,Mroz, A.Seweryn, Strength and compliance for cracked body, Proc. 6th Int. Symp. "Creep and Coupled Processes", Bialystok Tech. Univ., 377-387, 1998.
  62. A.Drescher, Z.Mroz, A refined superior sand model, Num. Models in Geomech. VI, Eds. S.Pietruszczak, G.N.Pande, Balkema, 21-26, 1997.
  63. O.Sergeyev, Z.Mroz, Optimal design of frame with damping constraints, Proc. WCSMO-2, Eds. W.Gutkowski, Z.Mroz, 625-630, 1997.
  64. K.Dems, Z.Mroz, Optimal segmentation of beam structures, Proc. WCSMO-2, Eds. W.Gutkowski, Z.Mroz, 725-730, 1997.
  65. Z.Mroz, A.Garstecki, Optimal loading in identification and design of structures, Proc. WCSMO-2, Eds. W.Gutkowski, Z.Mroz, 279-284, 1997.
  66. J.Piekarski, Z.Mroz, Sensitivity analysis at the bimodal bifurcation point, Proc. WCSMO-2, Eds. W.Gutkowski, Z.Mroz, 241-248, 1997.
  67. Z.Mroz, A.Seweryn, Damage evolution and compliance variation for variable multiaxial stress states, Proc. 5-th Int. Conf. Biaxial/Multiaxial Fatigue and Fracture, Eds. E.Macha, Z.Mroz, 349-370. 1997.
  68. Z.Mroz, Constitutive modelling of response of granular interface layers, Proc. IUTAM Symp. "Mechanics of Granular and Porous Materials", Kluwer AC. Publ., Eds. N.A.Fleck, A.C.F.Cocks, 69-83, 1997.
  69. Z.Mroz, K.Dems, Sensitivity analysis of thermo-elastic fields in composite materials, Proc. Int. Symp., Thermal Stress", Ed. R.Hetnarski, Rochester Inst. Techn., 1997.
  70. Z.Mroz, S.Stupkiewicz, Models of friction and wear in metal forming processes, Plasticity and its Applications, Proc. AEPA-96, Symp. Univ. Hiroshima, Eds. T.Abe, T.Tsuta, 67-75, 1996.
  71. Z.Mroz, J.Piekarski, Sensitivity analysis and optimal design of non-linear beam and frame structures, Proc. 1-st World Congr. Struct. Multidisc. Optim., Goslar 1995, Ed. G.I.N. Rozvany, Oxford Univ. Press, 1996.
  72. A.Seweryn, Z.Mroz, A non-local stress failure and fatigue damage cumulation condi-tion, in Multiaxial Fatigue and Design, Mech. Eng. Publ., ESIS21, Publ., 21, 261-282, 1996.
  73. M.Kowalczyk, Z.Mroz, Post-critical states in thin sheets with localized and diffuse plastic zones, Proc. COMPLAS IV, Barcelona, Ed. D.R.J. Owen et al., Pineridge Press, 659-670, 1995.
  74. Z.Mroz, P.Rodzik, The modified multisurface hardening model and its application to cyclic loading problems, Inelastic Response of Struct. under Cyclic Loads, Ed. Z.Mroz et al. Kluwer Publ., 3-18, 1995.
  75. Z.Mroz, S.Stupkiewicz, Hysteretic effects and progressive delamination at composite interfaces, Proc. IUTAM Symp. Microstructure-Property Interactions in Composite Materials, Ed. R.Pyrz, Kluwer Acad. Publ., 247-264, 1995.
  76. Z.Mroz, M.Kowalczyk, Compressive and shear failure modes in brittle materials, Proc. IUTAM Symp. Fracture of Brittle Disordered Materials, Eds.G. Baker & D.Karihaloo, E &FN Spon., 1994.
  77. J.Maciejewski, Z.Mroz, Analysis of soil tool interaction during filling process, Proc. Conf.: Design and Controlof Machines'', Zakopane, 1994.
  78. K.Dems, Z.Mroz, On optimal structural segmentation problem, Proc. IUTAM Symp. Discrete Structural Optimization, Ed. W.Gutkowski et al., Springer Verlag, 47-60, 1994.
  79. Z.Mroz, M.Kowalczyk Modelling of progressive damage evolution in rocks, Geomechanics 93, Ed. G.Rakovsky, Balkema, 159-166, 1994.
  80. J.Maciejewski, Z.Mroz, Incremental analysis of soil-tool interaction problems, Proc. Conf. Design and Control of Machines, Zakopane, 1993.
  81. Z.Mroz, K.Dems, Discrete and continuous reinforcement of materials and structures, Proc. IUTAM Symp. ''Optimal Design of Advanced Materials'', Lyngby, Ed. P.Pedersen, 1992.
  82. P.Nawrocki, Z.Mroz, Constitutive model for rock accounting for viscoplastic deformation and damage, Rock Mechanics, Balkema Publ., Ed. Tillerson, Wawersick, 1992.
  83. Z.Mroz, A.Zacharski, Inelastic analysis for rock with account for gas sorption and desorption, Geomechanics, Balkema, Publ., Ed. Z.Rakowski, 1992.
  84. Z.Mroz, P.Rodzik, On multisurface and integral description of plastic deformation and anisotropy of metals, Mecamat 92, Cachan, Ed. A.Benallal et al., 1992.
  85. Z.Mroz, S.Stupkiewicz, Constitutive modelling of slip and wear in elastic, frictional contact, Proc. Int. Conf., ''Contact Mechanics'', Ed. A.Curnier, Lausanne, 1992.
  86. Z.Mroz, Sensitivity analysis for vibration and stability of structures, Optimization of Large Systems, Ed. G.Rozvany, NATO DF6 ASI, 139-157, 1991.
  87. T.Sadowski, Z.Mroz, Deformation process of low MgO ceramic cylinder subjected to compressive loading, Proc. Int. Conf. Brittle Matrix Composites'', Ed. A.M.Brandt et al. Elsevier Appl. Sci., 366-376, 1991.
  88. W.Trampczynski Z.Mroz, Anisotropic hardening model and its application to cyclic loading, in ''Anisotropy and Localization of Plastic Deformation, Ed. J.P.Boehler, Appl. Sci., 467-473, 1991.
  89. A.Florkiewicz, Z.Mroz, Limit analysis of cracked and layered soils, Proc. 12-th Int. Conf. Soil Mech. Found. Eng., Rio de Janeiro, A.A.Balkema, 515-518, 1989.
  90. Z.Mroz, A.Jarzebowski, A constitutive model for sands and its application to monotonic and cyclic loadings, Proc. Int. Workshop on ''Constitutive Equations for Granular Non-Cohesive Soils'', A.A.Balkema Publ., 307-323, 1988.
  91. Z.Mroz, Sensitivity analysis and optimal design with account for varying shape and support conditions, in ''Computer Aided Optimal Design, Structural and Mechanical Systems'', Ed. C.A.Mota-Soares, Springer Verlag, 407-438, 1987.
  92. Z.Mroz, A.Niemunis, On the description of deformation anisotropy of materials, Proc. IUTAM Symp. ''Plasticity and Damage of Anisotropic Solids'', Ed. J.P.Boehler, Grenoble, Mechanical Eng. Publ. London, 171-186, 1987.
  93. M.Kleiber, Z.Mroz, Computer-aided inelastic analysis for design and instruction, Proc. Int. Conf. ''Numerical Methods in Plasticity'', Ed. E.T.Onate, Pineridge Press, 1987.
  94. J.Holnicki-Szulc, Z.Mroz, Active control of stresses and deflections of elastic structures by means of imposed distortions, in '' Structural Control'', Eds. H.Leipholtz, Martinus Nijhof Punl., 297-317, 1987.
  95. Z.Mroz, S.Pietruszczak, A constitutive model for clays and sands with account of anisotropic hardening, in ''Constitutive Relations for Soils'', Ed. G.Gudehus et al., Balkema Publ., 331-345, 1984.
  96. Z.Mroz, On isotropic hardening constitutive models in soil mechanics, in ''Constitutive Relations for Soils'', Ed. G.Gudehus, et al., Balkema Publ., 463-469, 1982.
  97. Z.Mroz, A.Zubelewicz, On initiation of flow of granular materials from hoppers, Proc. IUTAM Sym. on ''Mechanics of Granular Materials'', Delft, Eds. P.A.Vermeer, H.J.Luger, Balkema Publ., 569-577, 1982.
  98. S.Pietruszczak, Z.Mroz, Description of anisotropic consolidation of clays, Proc. Colloques Int., CNRS, Comportement Mecanique des Solides Anisotropes, No. 295, 597-622, 1982.
  99. Z.Mroz, M.Angelillo, Rate-dependent degradation model for concrete and rock, Proc. Intern. Conf. on ''Numerical Models in Geotechnical Engineering'', Zurich, Ed. R.Dungar et al., A.A.Balkema Publ., 208-217, 1982.
  100. Z.Mroz, On constitutive modelling of inelastic soils behavior, Proc. Int. Conf. Soil Mech., Mexico City, 49-60, 1982.
  101. Z.Mroz, On optimal force action and reaction on structures, Proc. IUTAM Symp. on ''Structural Control'', Ed. H.Leipholtz, North Holland Publ. Co., 523-544, 1980.
  102. E.F.Masur, Z.Mroz, Singular solutions in structural optimization problems, Proc. IUTAM Sym. ''Variational Methods in Solid Mechanics'', Ed. S.Nemat Nasser, Nord Holland, 1979.
  103. Z.Mroz, J.Zarka, Relations de comportement des metaux sous chargement cyclique, Proc. Conf. ''Chargements cyclique sous structures'', Ecole Polytechnique-CRNS, 1978.
  104. Z.Mroz, On stress-strain relations in soil mechanics, Proc. 1st Baltic Conf. on Soil Mechanics and Foundation Engineering, Techn. Univ. of Gdansk, Ed. W.Dembicki, 1, 127-163, 1975.
  105. Z.Mroz, On the description of plastic hardening of materials with application to variable and cyclic loading, Symp. Franco-Polonais, ''Problems de Rheologie et de Mecanique des Sols'', Ed. W.K.Nowacki, 293-317, 1974.
  106. A.Drescher, T.Hueckel, Z. Mroz, A method of multiple shear in the experimental analysis of powder materials (in Polish), Proc. Conf. ''Problems of dosing and transport of granular materials'', Inst. Industr. Chemistry, 1974.
  107. Z.Mroz, A.Gawecki, Post-yield behaviour of optimal structures, Proc. IUTAM Symp. ''Optimization in Struct. Design'', Eds. A.Sawczuk, Z.Mroz, 1974.
  108. Z.Mroz, Boundary-value problems in cyclic plasticity, Proc. 2-nd Intern. Conf. on ''Structural Mechanics in Nuclear Technology'', Berlin, 1973.
  109. N.C.Lind, Z.Mroz, A study of cyclic plasticity, Proc. Symp. ''Resistance and ultimate deformability of structures acted on by well defined repeated loads'', AIPC, 1, 1973.
  110. Z.Mroz, A description of workhardening of metals with application to variable loading, Proc. Intern. Symp. ''Foundations of Plasticity'', Ed. A.Sawczuk, Noordhoff Intern. Publ., 1972
  111. Z.Mroz, On the theory of steady cyclic in structures, Proc.1-st Intern. Conf. on ''Struct. Mechanics in Reactor Technology'', 2, 1971.
  112. T.Hueckel, Z.Mroz, Some boundary-value problems for variable density materials, Problemes de Rheologie, Proc. Symp. Franco-Polonais, PWN, 1971.
  113. Z.Mroz, Optimal design of structures for limit load constraint (in polish), proc. Of Workshop "Methods of optimization of deformable systems", Ossolineum, Ed. A.Sawczuk, 1969.
  114. Z.Mroz, Optimum design of reinforced shells of revolution, Proc. IASS Symp. Non-elastical Shell Problems'', Warsaw, 732-748, 1963.
  115. Z.Mroz, On the design of non-homogeneous, technically orthotropic plates, Proc. IUTAM Symp. "Non homogeneity in Elasticity and Plasticity", Warsaw, Ed. W. Olszak, PWN, 191-202, 1958.