Publications

Journal articles

• R.Stocki, T. Szolc, P. Tauzowski, J. Knabel, , extended version of the IFToMM-2010 paper selected for publication in a special issue of Mechanical Systems and Signal Processing, under review
  
  
• R. Stocki, K. Kolanek, J. Knabel, P. Tauzowski, FE based structural reliability analysis using STAND environment, submitted for reviews in Computer Assisted Mechanics and Engineering Sciences, vol. 16. p. 35-58, 2009.
  
  
• T. Szolc, P. Tauzowski, R. Stocki, J. Knabel, Damage identification in vibrating rotor-shaft systems by efficient sampling approach, Mechanical Systems and Signal Processing, vol. 23, 1615-1633, 2009.
  
  
• T. Szolc, P. Tauzowski, J. Knabel, R. Stocki, Nonlinear and parametric coupled vibrations of the rotor-shaft system as fault identification symptom using stochastic methods, Nonlinear Dynamics, vol. 57, p. 533-557, 2009.
  
  
• R.Stocki, P. Tauzowski, J. Knabel, Reliability analysis of a crashed thin-walled s-rail accounting for random spot weld failures, International Journal of Crashworthiness, Vol. 13, No. 6, p. 693-706, 2008.
  
  
• J. Knabel, Analiza niezawodnosci konstrukcji sprezysto - plastycznych przy uzyciu powierzchni odpowiedzi. Prace IPPT 2004.
  
  
• M. Kleiber, J. Knabel, J. Rojek, Response surface method for probabilistic assessment of metal forming failures. Int. J. Numer. Meth. Engng, vol. 60, p. 51-67, 2004.
  
  
• Jerzy Rojek, Michal Kleiber, Antoni Piela, Rafal Stocki and Jaroslaw Knabel. Deterministic and stochastic analysis of failure in sheet metal forming operations. 6, STEEL GRIPS 2 (2004) Suppl. Metal Forming 2004.
  
  
• J. Knabel, T. Lewinski, Selected equilibrium problems of thin elastic helicoidal shells. Arch. Of Civ. Eng. XLV, 2, 1999.
  
  

In books

• P. Tauzowski, R. Stocki, J. Knabel, T.Szolc, Stochastic approach of crack parameters identification of rotor shaft machines by means of Monte Carlo sampling, in Knowledge Acquisition for Hybrid Systems of Risk Assessment and Critical Machinery Diagnosis, Ed. W. Moczulski, K. Ciupke, IFFM & Silesian University of Technology, p. 161-178, 2008.
  
  
• P. Tauzowski, R. Stocki, J. Knabel, T.Szolc, Identification methods of crack parameters of rotor shaft machines monitored "on-line" applied to analysis of steam turbogenerator, in Knowledge Acquisition for Hybrid Systems of Risk Assessment and Critical Machinery Diagnosis, Ed. W. Moczulski, K. Ciupke, IFFM & Silesian University of Technology, p. 179-192, 2008.
  
  

Selected publications in conference proceedings

• R.Stocki, T. Szolc, P. Tauzowski, J. Knabel, "Robust design optimization of the vibrating rotor shaft system subjected to rubbing constraints", in proc. of The 8th IFToMM International Conference of Rotor Dynamics, September 12-15, 2010, KIST, Seoul, Korea, p. 1022-1029
  
  
• J. Knabel, P. Tauzowski and R. Stocki, "Reliability based Limit Design of Skeletal Structures", in Proceedings of the Twelfth International Conference on Civil, Structural and Environmental Engineering Computing, B.H.V. Topping, L.F. Costa Neves, R.C. Barros, (Editors), Civil-Comp Press, Stirlingshire, United Kingdom, paper 53, 2009. doi:10.4203/ccp.91.53.
  
  
• J. Lógó, M. Movahedi Rad, T. Tamássy, J. Knabel and P. Tauzowski, "Reliability Based Optimal Design of Frames with Limited Residual Strain Energy Capacity", in Proceedings of the Twelfth International Conference on Civil, Structural and Environmental Engineering Computing, B.H.V. Topping, L.F. Costa Neves, R.C. Barros, (Editors), Civil-Comp Press, Stirlingshire, United Kingdom, paper 52, 2009. doi:10.4203/ccp.91.52.
  
  
• M. Movahedi Rad, J. Lógó, J. Knabel and P. Tauzowski, Reliability based limit design of frames with limited residual strain energy capacity, in proc. of the 80th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), 9-13 February 2009, Gdansk, Poland.
  
  
• J. Knabel, K. Kolanek, V. Nguyen Hoang, R. Stocki, P. Tauzowski. Structural reliability analysis using object oriented enviroment STAND, in proc. of the 36th Solid Mechanics Conference, 9-12 September 2008, Gdansk, Poland.
  
  
• T. Szolc, P. Tauzowski, R. Stocki, J. Knabel. Stochastic approach for crack identification in rotating shafts using Monte Carlo simulations and a hybrid mechanical model, in proc. of the 9th International Conference on Vibrations in Rotating Machinery, 8-10 September 2008, Exeter, UK, p. 603-618, IMechE, 2008.
  
  
• J. Lógó, M. Movahedi Rad, J. Knabel and Z. Hortobágyi, Reliability Based Limit Analysis and Shakedown of Framed Structures with Limited Residual Strain Energy Capacity, in proc. of the 9th International Conference on Computational Structures Technology, Edited by: B.H.V. Topping and M. Papadrakakis, 2-5 September 2008, Athens, Greece.
  
  
• R. Stocki, P. Tauzowski, J. Knabel. Dealing with noisy limit state function in structural reliability assessment of a crashed thin-walled beam , in proc. of the 4th International ASRANet Colloquium, 25-27 June 2008, Athens, Greece, on CD.
  
  
• K. Dolinski, J. Knabel, Reliability-oriented shakedown formulation, ICOSSAR’2005, 9th International Conference on Structural Safety and Reliability, Rome, Italy, June 19-23 2005.
  
  
• G. Bielawski, M. Kleiber, J. Knabel, J. Rojek, A. Siemaszko, Reliability analysis of advanced FEM performed elastic-plastic structures by response surface method, Second M.I.T. Conference on Computational Fluid and Solid Mechanics, June 17-20, M.I.T Cambridge Massachusetts, U.S.A. 2003.
  
  
• J. Rojek, J. Knabel, M. Kleiber, Ocena prawdopodobienstwa pekania blachy w procesie tloczenia, Materialy X Jubileuszowej Konferencji Informatyka w Technologii Metali, KomPlasTech2003, Ustron, 12-15 stycznia, 169-176, 2003.
  
  
• J. Knabel, J. Rojek, R. Stocki and M. Kleiber, Reliability analysis of sheet metal forming operations by response surface method, AMAS Course on Reliability Based Optimization RBO’02, Warsaw,23-25 September,211-221, 2003.
  
  
• M. Kleiber, J. Knabel, J. Rojek, R. Stocki. Reliability-based analysis of large deformations in metal-forming operations. Proc. of IUTAM Symposium on Computational Mechanics of Solid Materials at Large Strains, Ed. Christian Miehe, Kluwer Academic Publishers, 435-444, 2003.
  
  
• J. Knabel, G. Bielawski, A. Siemaszko, Reliability Analysis of Elastic-Plastic structures using Response Surface Methodology. 34 Solid Mechanics Conference, SOLMECH, Zakopane, September 2-7, 2002.
  
  
• M. Kleiber, J. Knabel, J. Rojek, Reliability Assessment in Metal Forming Operations, Fifth World Congress on Computational Mechanics (WCCM V), July 7-12,2002, Vienna, Austria. Eds.: H.A. Mang, F.G. Rammerstorfer, J. Eberhardsteiner, 2002.
  
  
• A. Siemaszko, G. Bielawski and J. Knabel. Shakedown And Limit Reliability-Based Design. SmiRT-16 Structural Mechanics in Reactor Technology, Washington, DC USA, August 12-17, 2001.
  
  
• A. Siemaszko, J. Knabel. Reliability-based adaptation analysis. In book of abstracts of the 33rd Solid Mechanics Conference, p. 351 – 352, 5 – 9 September, Zakopane 2000.
  
  
• K. Dolinski, J. Knabel. Response surface approach in the second order reliability assessment. In book of abstracts of the 33rd Solid Mechanics Conference, p. 153 – 154, 5 – 9 September, Zakopane 2000.
  
  
• A. Siemaszko, J. Knabel. Response Surface Approach In Shakedown Reliability Analysis Of Skeletal Structures. In proc. of the XIV-th Polish Conference: Computer Methods in Mechanics, p. 321 - 322, 26 - 28 May, Rzeszów 1999.
  
  
• J. Knabel, T. Lewinski. Statics of thin helicoidal shells. In book of abstracts of the VI-th, Conference - 98: Shell Structures, Theory and applications, p.161 - 162, 12 - 14 October, Jurata, 1998.